Barco Coronis Fusion Podręcznik Użytkownika Pobierz pdf (Strona 46)

46 Coronis Fusion 6MP

Video encoding modes

ABOUT VIDEO ENCODING MODES

Video encoding modes specify how the color and luminance information

is encoded in the video signal. In consumer displays, this is usually done

by a limited 8-bit encoding mechanism. Your C

ORONIS FUSION 6MP display

however, features 10-bit encoding enabling it to better match the DICOM

defined grayscale range. Such an extensive range is necessary to comply

with the guidelines set forward by the latest medical guidelines.

The available video encoding modes for your display are listed below.

Your CORONIS FUSION 6MP display automatically detects the

connected video input signals and applies the correct video

encoding settings. Manually selecting a video encoding mode

is possible, but then your display’s image source selection

mode should be set to allow this. Please refer to “Image

source selection modes” on page 43 to do this.

Please note that the display controller connected to your

display might not always support all these video encoding

modes.

Standard This mode uses the standard 8 bit encoding

mechanism.

HDR1 This mode features 10-bit video encoding

following the High Dynamic Range (HDR)

standard, usually used on color displays.

HDR2 HDR2 is a Barco specific mode featuring

10-bit video encoding following the High

Dynamic Range (HDR) standard but

allowing full refresh rate (which is not

always possible with HDR1). This mode is

usually used on color displays.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 83 84

Brak uwag

Barco Coronis Fusion Podręcznik Użytkownika Strona 46